Unique Heating & Cooling knows that a home comfort system is a major investment. That's why we offer a pre-season maintenance plan to ensure that your heating and cooling systems keep your home comfortable for years to come.
Call or click today to learn more about how to sign up for your maintenance plan!
1. Clean Burner Assembly to improve combustion, reducing waste heat
2. Tune Burners for more efficient burns, saving energy
3. Clean Ignition Assembly to ensure reliable operation on demand
4. Clean & Inspect Furnace Heat Section to ensure safe operation and the absence of cracks from metal fatigue
5. Verify Flue Draft to ensure dangerous gas by-products are properly venting to the outdoors and flue pipes are free from obstruction
6. Inspect Flue Pipe to ensure no corrosion is present which can lead to cracks and the introduction of dangerous fumes into your home
7. Calibrate Thermostat for accurate control and to prevent system from running longer than necessary, increasing utility usage
8. Test Refrigerant Charge to ensure optimum levels leading to lower utility usage and extend compressor life
9. Test Capacitors to ensure reliable operation and continued compressor and motor protection
10. Test Crankcase Heaters to ensure proper compressor protection
11. Inspect & Test Controls & Safeties to keep operating costs low and prevent failures
12. Adjust Fan Switch to prevent wasted energy and excess sound levels from nuisance cycling
13. Adjust Balancing Dampers to improve comfort
14. Clean or Replace Filters to reduce energy use, reduce compressor strain, improve indoor air quality, and improve comfort
15. Clean & Adjust Blower Assembly to extend motor life, improve air quality, and reduce sound
16. Check Air Flow to ensure proper air flow across the coil for proper humidity removal and reliable operation
17. Visually Inspect Ductwork to identify obvious leaks, which reduce system efficiency and increase utility expense
18. Tighten Electrical Connections to ensure uninterrupted system operation
19. Measure & Record Voltage & Amperage to identify baseline operating conditions
20. Lubricate All Moving Parts to maintain efficiency and extend equipment life
21. Clean Inside Evaporator Coil to restore heat transfer efficiency, reduce utility cost, and improve air quality. *Only if it is accessible.
22. Clean Outside Condensing Coil to restore heat transfer efficiency and reduce utility cost
23. Clean Condensate Drains to prevent water damage and the potential for mold formation
24. Apply Protective Coating to outside unit to protect finish
